Hitachi Compute Blade 2000 User Manual page 1107

<Alert>
Alert ID: 0x1531
Message: LP configuration was saved. (RC=6)
4 Save the new settings on the LPAR manager screen.
Go to the LPAR manager Menu screen.

Press F9: Save Configuration on the LPAR manager Menu screen.

+------------------------------------------------------------------------------+
|+-- Menu [LP_192168020] ----------------------------- 2009/02/18 14:15:45 -+ |
||
|| Logical Partition Configuration
|| Logical Processor Configuration
|| Physical Processor Configuration
|| PCI Device Information
|| PCI Device Assignment
|| VNIC Assignment
|| Shared FC Assignment
|| Allocated FC Information
|| +------------------------------+
|+----------------------| Saving LP configuration ... |----------------------+ |
| +------------------------------+
|+-- Tips -------------------------------------------------------------------+ |
|| F3 : Activate F8 : LPAR Screen
|| F4 : Deactivate F9 : Save Configuration
|| F5 : Reactivate
|| F6 : Add Definition Alt + t : Screen Refresh
|| F7 : Remove Alt + r : LP System Shutdown
|+---------------------------------------------------------------------------+ |
| Configure logical partitioning of processors and memory
+------------------------------------------------------------------------------+
| :Move Cursor Enter:Select
+------------------------------------------------------------------------------+
Then you can perform operation on the LPAR manager screen.
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
Front Panel
LP System Logs
Firmware Version Information
LP Ver. : VV-RR(TT-KK)
1056
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
| |
| |
|
|