Hitachi Compute Blade 2000 User Manual page 981

If you enter the IP address of DNS server 2, the value after the change is displayed. A
warning indicating that the connection to the I/O module may be disconnected after the
setting is applied is displayed. A message to confirm the change is displayed. At the
prompt, type Y and press Enter. The network setting is reflected on the I/O module.
When the IP address of the I/O module is changed, the session connected using the
former IP address is disconnected. To cancel the network setting in the I/O module,
type N and press Enter, or just press Enter to confirm the new setting value.
(E,[Q]) : L (Enter)
IP address : 192.168.
([Unchange]) : 192.168.0.10
Subnetmask : 255.255.255.
([Unchange]) : 255.255.254.0
Default gateway : 0.
([Unchange]) : (Enter)
DNS0 : 0.
([Unchange]) : (Enter)
DNS1 : 0.
([Unchange]) : (Enter)
DNS2 : 0.
([Unchange]) :
-- I/O module LAN interface setting --
IP address Subnetmask
--------------- --------------- ---------------
192.168. 0. 10 255.255.254.
-- I/O module DNS setting --
D IP address
- ---------------
0 0. 0. 0. 0
1 0. 0. 0. 0
2 0. 0. 0. 0
WARNING : Session may be disconnected when setting saved.
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
0. 65
(Enter)
0
(Enter)
0. 0. 0
0. 0. 0
0. 0. 0
0. 0. 0
Default gateway
0 0. 0. 0. 0
930