Hitachi Compute Blade 2000 User Manual page 1305

On the Date and Time screen, place the cursor on Timesync and press

Enter to open the subscreen. Select NTP and press Enter.
|| 7
|| 8
|| 9
|| 10
|+---------------------------|
|
|+- System Date and Time ----+-------------------+----------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|--+
On the System Service State screen, confirm that the NTP state is SYNC.

|+- System Service--------------++-- Virtual LAN Segment State----------------+|
|| SVP Access : RUN
|| BSM Access : RUN
|| HA Monitor : RUN
|| NTP : SYNC
||
On the Date and Time screen, synchronize the LPAR time using Adjust

LPAR Time.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync SVP
|+----------------------------------------------------------------------------+|
On the Menu screen, press F9:Save Configuration to save the

configuration.
|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
(10) How to operate LPAR manager with Not using NTP
LPAR manager firmware version 58-7X/78-7X or later
On the Date and Time screen, place the cursor on TymeSync and press

Enter to open the subscreen. Select Disable and press Enter.
|| 7
|| 8
|| 9
|| 10
|+---------------------------|
|
|+- System Date and Time ----+-------------------+----------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
+-------------------+
| Select NTP Server |
| |
| Disable |
NTP |----------------------------+|
| SVP |e Up / [PageDown]:Page Down |
|| PORT#/NIC# : V 1 2 3 4 5 6 7 8 ||
|| a : D A D
|| b : D A D
|| c : D
|| d : D
+-------------------+
| Select NTP Server |
| |
| Disable |
NTP |----------------------------+|
| SVP |e Up / [PageDown]:Page Down |
1254
||
||
||
||
Adjust LPAR Time ||
||
||
||
||
||
||
Adjust LPAR Time ||
||
||
| |
|
||
||
||
||
Adjust LPAR Time ||
||
||