Hitachi Compute Blade 2000 User Manual page 1147

10 Enter the drivers command to find out the driver handle of "HITACHI Fibre-channel
Driver"
Shell> drivers
T D
D Y C I
R P F A
V VERSION E G G #D #C DRIVER NAME
== ======== = = = == == ================================ ==================
:
65 01010001 D X - 1 - Hitachi Fibre channel Driver
:
Shell>
The handle is "65" in the example above.
11 Enter drvcfg [driver handle] to find out the controller handle.
Shell> drvcfg 65
Configurable Components
Drv[65] Ctrl[74] Lang[eng]
Shell>
The controller handle is "74" in the example above.
When multiple FC ports are assigned, multiple results are
displayed. There is no problem if you select a controller
handle between those displayed,
12 Enter drvcfg –s [driver handle] [controller handle].
hfccfg> prompt is displayed.
Shell> drvcfg -s 65 74
Set Configuration Options
Drv[65] Ctrl[74] Lang[eng]
hfccfg>
13 Enter the select command and select an adapter for booting.
hfccfg> select
HBA FC Port List:
Num Bus Dev Func
--- --- --- ----
1 - 09 04 01
C - cancel
Select Number ---> 1
Select "1" in the example above.
IMAGE NAME
current WWPN original WWPN
---------------- --------------
XXXXXXXXXXXXXXXX
1096
EFIdriver