Hitachi Compute Blade 2000 User Manual page 733

# Item
1 Power
2 Status
3 LID lamp
4 System
5 Firmware version
6 MAC address
7 FRU
8 Sensor
9 Shutdown
10 Restart
11 Turning on
12 Turning off
 Role-dependent variation in available operations
To display detailed information about a module, the user must have chassis

permission.
To perform actions on a module, the user must have chassis permission.

Description
The power status of the module.
Set as: ON or OFF
The operating status of the module.
Set as: Starting, Normal, BootDisable, Shutting Down, or
Error
The status of the Location ID LED for the module.
Set as: Lit or Unlit
Indicates whether the management module is serving as
an active or standby system.
Set as: Active or Standby
Displays the firmware version of the management
module, dictionary version, and equipment parameter
version.
The MAC addresses associated with the module.
The MAC addresses of Port 0 and Port 1 are displayed.
FRU information for the module (under categories Board,
Product, and Multirecord).
The values reported by the sensors in the module.
Shuts down the module.
Restarts the module.
Turns on the Location ID LED for the module.
Turns off the Location ID LED for the module.
682