Initial Installation Operation Overview - Hitachi Compute Blade 2000 User Manual

Initial installation operation overview

This section outlines required operations at initial installation.
For details about each operation, see the following sections.
For details about operations other than the operations
described below, see the manual contained in the compact
disc- Read Only Memory (CD-ROM that came with the
module.
1 Login.
Log in to the switch module. Use the user ID "admin" for initial installation. The
following table shows factory default settings for the user ID and password.
Item
User ID
Password
2 Setting the switch module administrator's password.
Set the switch module administrator's password, which is initially fixed as the
factory default value. To ensure security against unauthorized access, change the
password.
Factory default setting
admin
password
844