Hitachi Compute Blade 2000 User Manual page 790

Do not restore or initialize the management module backup
file while the server blade works. If you do, proper
operation may not be available due to the discrepancy
between the restored or initialized configuration and the
configuration when the server blade operates.
When restoring or initializing the backup file while the
server blade with N+M cold standby enabled is not in
operation, make sure to perform Smart Configure
afterwards.
 Role-dependent variation in available operations
To back up and restore settings, the user must have chassis permission.
When restoring the configuration before LPAR migration to
the migrated partition with the restoring function of this
command, restore the configuration before migration to
both the source and destination. Refer to Chapter 12:
Logical partitioning manager for further information.
739