Hitachi Compute Blade 2000 User Manual page 1205

# Key
12 F6 Adds (defines) an LPAR.
When you press the F6 key, a subscreen where you can select
the LPAR that you want to add is displayed. Select the LPAR
and press Enter.
When the number of definable LPARs is 18 or larger, arrow keys
[←] or [→] are displayed.
LPAR manager firmware version 59-0X/79-0X or later
Changes USB automatic Attach settings.
Point the cursor on A or R for USB assignment status, and press
the F6 key to toggle between Set and Reset.
Changes the MAC address.
When you press the F6 key, a subscreen where you can select
the MAC address that you want to change is displayed. Enter the
new MAC address and press Enter.
Changes the LPAR manager display time.
When you press the F6 key, a subscreen where you can change
the LPAR manager display time is displayed. Enter the new
LPAR manager display time, and press Enter.
13 F7 Deletes an LPAR.
When you press the F7 key, a subscreen where you can select
the LPAR that you want to delete is displayed. Select the LPAR
and press Enter. The subscreen will not be displayed if the
LPARs are entirely undefined. If an LPAR is in the Activate state
or the Failure state, its name will not be displayed, and it cannot
be selected by the cursor.
When the number of defined LPARs is 18 or larger, arrow keys
[←] or [→] are displayed.
Sets the VLAN mode.
When you press the F7 key, a subscreen where you can select
the VLAN mode that you want to add is displayed. Select the
VLAN mode and press Enter.
Changes the time zone on the LPAR manager system.
When you press the F7 key, a subscreen where you can select a
time zone on the LPAR manager system is displayed. Select a
new time zone and press Enter.
14 F8 Switches to display of a guest screen.
When you press the F8 key, the activated LPARs become
selectable. To switch screens, select the LPAR that you would
like to move to the foreground and press Enter. The subscreen
will not be displayed if the LPARs are entirely undefined. If an
LPAR is in a Deactivate, its name will not be displayed and it
cannot be selected by the cursor.
When the number of defined LPARs is 18 or larger, arrow keys
[←] or [→] are displayed.
For LPAR manager firmware 57-30 or later versions:
Sets Inter-LPAR packet filtering.
When you press the F8 key, a subscreen for packet filter
selection is displayed. Select the Inter-LPAR Packet Filtering
and press Enter.
15 F9 LPAR manager firmware version 59-70/79-70 or later
Sets transmission bandwidth limitation for VF NIC.
Operation/Role
1154
Screen on which
operation is
performed
LPAR manager
Menu, LPAR
Configuration
PCI Device
Assignment
VNIC Assignment
Date and Time
LPAR manager
Menu, LPAR
Configuration
VNIC Assignment
Date and Time
LPAR manager
Menu, LPAR
Configuration
VNIC Assignment
VNIC Assignment