Hitachi Compute Blade 2000 User Manual page 621

Items displayed on the screen are described in the table below.
Item
No.
Name
IP address
Alert level
If you enter M in the BSM command menu and press Enter, you are asked to select
the SC/BSM connection setting. At the prompt, enter a SC/BSM connection setting
number, and the current setting is displayed in the following numerical order, or the
recommended value is displayed. To proceed to the next setting, press Enter, or enter
a setting value and press Enter.
Menu
1
2
3
If you enter an alert level, the changed setting value is displayed. A confirmation
message appears. At the prompt, enter Y and press Enter. The edited SC/BSM
connection setting is saved. To cancel the setting, enter N and press Enter, or just
press Enter.
(M,D,DB,DM,T,[Q]) : M (Enter)
Select manager (0-3,[Q=Quit]) : 1 (Enter)
Name : BSM_1
([Unchange]) : (Enter)
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.0.253 (Enter)
Alert level : All
(0=All,1=Alert,2=Information,3=Disable,[Unchange]) : 1 (Enter)
-- Manager setting --
No. Name
--- --------------- --------------- -----------
0 BSM_0
1 BSM_1
2 -------------
3 -------------
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
SC/BSM connection setting number
SC/BSM name
IP address of SC/BSM
Alert level notified to SC/BSM
All: all alerts are notified.
Alert: alerts in the error level are notified.
Information: alerts in the information level are notified.
Disable: no alert is notified.
SC/BSM name
SC/BSM IP address
Alert level to notify SC/BSM
IP address Alert level
192.168. 0.254 All
192.168. 0.253 Alert
------------- ---------
------------- ---------
570
Description
Description