Hitachi Compute Blade 2000 User Manual page 693

If you enter T at the ID LED control menu and press Enter, you are prompted to
select a switch module.
(T,F,[Q]) : T (Enter)
Select switch module (0-5,[A=All]) : A (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Switch module0> Turn on LID lamp was completed.
- <Switch module1> Turn on LID lamp was completed.
- <Switch module2> Turn on LID lamp was completed.
- <Switch module3> Turn on LID lamp was completed.
- <Switch module4> Turn on LID lamp was completed.
- <Switch module5> Turn on LID lamp was completed.
Hit enter key. (Enter)
If you enter F at the ID LED control menu and press Enter, you are prompted to
select a switch module.
(T,F,[Q]) : F (Enter)
Select switch module (0-5,[A=All]) : A (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Switch module0> Turn off LID lamp was completed.
- <Switch module1> Turn off LID lamp was completed.
- <Switch module2> Turn off LID lamp was completed.
- <Switch module3> Turn off LID lamp was completed.
- <Switch module4> Turn off LID lamp was completed.
- <Switch module5> Turn off LID lamp was completed.
Hit enter key. (Enter)
642