Hitachi Compute Blade 2000 User Manual page 731

# Item
1 Module
2 Power
3 Status
4 LID lamp
5 System
6 Shutdown
7 Restart
8 Switch
Do not perform Shutdown and Restart while the server
blade is operating. Error events, which have occurred while
the management module is restarting or shutting down,
may not be detected.
When restarting and shutting down a management module
while the server blade with N+M cold standby enabled is
not in operation, make sure to perform Smart Configure
afterwards.
Description
The module number. If the number appears as a
hyperlink, clicking the link takes you to the Management
module details view.
The power status of the module.
Set as: ON or OFF
The operating status of the module.
Set as: Starting, Normal, BootDisable, Shutting Down, or
Error
The status of the Location ID LED for the module.
Set as: Lit or Unlit
Indicates whether the management module is serving as
an active or standby system.
Set as: Active or Standby
Shuts down the modules whose check boxes are
selected.
Restarts the modules whose check boxes are selected.
Switches the roles of the active management module
and the standby management module.
680