Hitachi Compute Blade 2000 User Manual page 1297

On the Date and Time screen, place the cursor on LPAR SEL Time and

press Enter to show a subscreen. Select LPAR RTC and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Date and Time ---------------- LPAR SEL Time
|| # Name Sta Time Mode
|| 1 LPAR1 Dea Local-Time
|| 2 LPAR2 Dea Local-Time
|| 3
|| 4
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
|+---------------------| Last Deactivated
|
|+- System Date and Tim+--------------------------------+---------------------+|
|| Date and Time yyy| Display LPAR RTC
|+-Setting-------------+--------------------------------+---------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
| F6:Change System Date and Time F7:Change System Time Zone
+------------------------------------------------------------------------------+
On the Date and Time screen, press F7: Change system Time Zone to

show a subscreen. Set your time zone and press Enter.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
On the Date and Time screen, synchronize the LPAR time using Adjust

LPAR Time.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
On the Menu screen, press F9: Save Configuration to save the

configuration.
|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
(3) How to switch the time display
Display the Date and Time screen.
Place the cursor on Select Display at the upper right side and press Enter to
display a subscreen for selecting the displayed time. Place the cursor on the time to
display and press Enter.
The time display switches to the selected time information.
Date and Time Time Zone
yyyy/mm/dd hh:mm:ss + 9:00
yyyy/mm/dd hh:mm:ss + 9:00
+--------------------------------+
| Select Display Time
|
| LPAR RTC
| LPAR SEL Time
| Last Activated
| RTC Last Modified
1246
-+|
||
||
||
||
||
||
| ||
| ||
| ||
| ||
| ||
|---------------------+|
|[PageDown]:Page Down |
|0 Adjust LPAR Time ||
||
||
|
Esc:Menu |
Adjust LPAR Time ||
||
||
Adjust LPAR Time ||
||
||
| |
|