Hitachi Compute Blade 2000 User Manual page 773

Maintenance LAN network
# Item
1 Module 0 IP
address
2 Module 1 IP
address
3 Subnet mask
4 Network address
5 Subnet mask
6 Router IP address
The LAN port redundancy settings
# Item
1 Port
2 Module
3 Redundancy
4 Time until judging
that is not
possible to
connect (sec)
5 Time until judging
connected return
(sec)
ICMP Ping Generation
# Item
1 Generation
 Role-dependent variation in available operations
To display network settings, the user must have network permission.
Description
The IP address of management module 0 in the
maintenance LAN network.
The IP address of management module 1 in the
maintenance LAN network.
The subnet mask in the maintenance LAN network.
The destination network address for static routing.
The subnet mask associated with the above network
address.
The IP address of the router responsible for static routing.
Description
The LAN port of the management module.
Indicates whether the active or standby module is
connecting to the network.
Set as: Active or Standby
Indicates whether LAN redundancy is enabled.
Set as: Enabled or Disabled
The length of time that must elapse before a LAN link is
considered to be down.
A value from 1 to 3600 (in seconds)
The length of time that must elapse before a LAN link is
considered to be up.
A value from 1 to 3600 (in seconds).
Description
Issues an ICMP Ping request to the specified IP address.
722
Edit
Edit
Yes
Yes
Yes
Edit