Hitachi Compute Blade 2000 User Manual page 1234

High-performance server blade
Reduction in
LPAR manager firmware
Version currently used (1) Added or
reduced
78-12 to 78-22
78-40 or later Added or
reduced
Update to a specific version (2) Not added/
reduced
Before update After update
78-12 to 78-22 78-40 to
78-7X
physical Description
processors
Since the setting is taken over as it is,
the incorrect setting information
remains set.
On the Logical Partition Configuration
screen, reset the number of LPAR
logical processors using the function.
Then if the physical processor number
needs to be set to the logical processor,
reset it on the Logical Processor
Configuration screen and save the
LPAR manager configuration. Without
resetting, an error occurs when you
create LPAR configuration or update it
from SC/BSM.
The setting is initialized.
If the physical processor number needs
to be set to the logical processor, reset it
on the Logical Processor Configuration
screen and save the LPAR manager
configuration. Without resetting, LPAR
manager will automatically assign a
physical processor.
The setting is initialized, but the
information remains internally.
On the Logical Partition Configuration
screen, reset the number of LPAR
logical processors using the function.
Then if the physical processor number
needs to set to the logical processor,
reset it on the Logical Processor
Configuration screen and save the
LPAR manager configuration. Without
resetting, an error occurs when you
create LPAR configuration or update it
from SC/BSM.
1183