Hitachi Compute Blade 2000 User Manual page 1061

Item
UTC
Logical VGA snapshot
NTP
LPAR time
LPAR manager system time
Power saving
Power capping
C3
C6
Available virtual NIC system number at the
maximum
High reliability N+1 cold standby
UPS
Maintenance Guest memory dump collection command
LPAR manager dump collection command
LPAR manager firmware version up
PCIe error isolation
Virtualization
VMwre
software
Hyper-V
*1: Windows Server 2008 Datacenter Edition is not supported.
*2: The item is supported by LPAR manager firmware version 58-71/78-71 or later.
*3: Max memory amount available for assignment = (Max physical memory) – (Memory amount
used by LPAR manager)
*4: This item is available only with the onboard LAN controller on a server blade, not with an
expansion card or PCI card.
*5: This item is available only through WOL by SC/BSM, SC/DPM, or HCSM.
With LPAR manager firmware version 58-80/78-80 or earlier, use shared NIC #0 to #7.
*6: This item is supported only with 58-72X/78-73 or later.
*7: DVD remote FD function of the remote console is not available with LPAR manager firmware
version 58-1X/78-1X or earlier.
*8: Up to 2 for Essential models.
*9 This item is supported by standard server blade: X55R3/X55S3/X55R4 models and
high-performance server blade: X57A2 model.
*10 HCSM 7.5.1 or later is supported.
*11 Standard server blade: X55R4 model supports LPAR manager expansion mode only.
*12 See Notes on using SR-IOV
*13 VF NIC view and settings are not supported.
*14 VF NIC does not support this item.
Supported (Not supported) by
the following LPAR manager
for details.
1010
firmware versions
79-41 or higher
78-1X or later
78-1X or later
78-7X or later
78-1X or later
78-1X or later
78-1X or later
128: 78-1X or later
1024: 79-21 or later
78-1X or later
78-1X or later
78-1X or later
78-1X or later
78-1X or later
78-7X or later
Not supported
Not supported