Hitachi Compute Blade 2000 User Manual page 1306

On the Menu screen, press F9:Save Configuration to save the

configuration.
|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
(11) How to set an IP address of NTP servers
LPAR manager firmware version 58-7X/78-7X or later
Display the Date and Time screen. Place the cursor on NTP Server 1 or NTP
Server 2 and press Enter to display a subscreen. On the subscreen, type an IP
address of the NTP server and press Enter.
If you type anything other than the IP address format string: XXX.XXX.XXX.XXX,
the error occurs. To cancel an NTP server setting, delete the IPaddress of the NTP
server and press Enter. When the setting is cancelled, None is shown.
Check if NTP server settings and the time zone setting have
no problem before setting an IP address to the NTP server.
(12) How to change the LPAR manager display time
Display the Date and Time screen. Press F6: Change System Date and Time to
display a subscreen showing the current time. Type any time you need and press
Enter. AD year is limited from 2000 to 2099.
(13) How to change the LPAR manager system time zone
Display the Date and Time screen. Press F7: Change System Time Zone to
display a subscreen for selecting a system time zone. With arrow keys [↑], [↓], [←],
[→], PageUp, and PageDown, select a system time zone you need and press
Enter.
Shut down all OSs.

On the Date and Time screen, place the cursor on LPAR RTC and press

Enter to open the subscreen. Select LPAR SEL Time and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Date and Time ---------------- LPAR RTC
|| # Name Sta Time Mode
|| 1 LPAR1 Dea ----------- yyyy/mm/dd hh:mm:ss ------
|| 2 LPAR2 Dea ----------- yyyy/mm/dd hh:mm:ss ------
|| 3
|| 4
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
|+---------------------| Last Deactivated
|
|+- System Date and Tim+--------------------------------+---------------------+|
|| Date and Time yyy| Display LPAR SEL Time
|+-Setting-------------+--------------------------------+---------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
| F6:Change System Date and Time F7:Change System Time Zone
+------------------------------------------------------------------------------+
Date and Time Time Zone
+--------------------------------+
| Select Display Time
|
| LPAR RTC
| LPAR SEL Time
| Last Activated
| RTC Last Modified
1255
| |
|
-+|
||
||
||
||
||
||
| ||
| ||
| ||
| ||
| ||
|---------------------+|
|[PageDown]:Page Down |
|0 Adjust LPAR Time ||
||
||
|
Esc:Menu |