Hitachi Compute Blade 2000 User Manual page 1243

No. Title
(6) ID Displays the ID used by the LPAR when the physical PCI device is in
shared mode.
Numeric: vfcID
1a-8h: Network segment identifier for a shared NIC
When SR-IOV is enabled, "v" is added to the end.
Va-Vd: network segment identifier for a virtual NIC
(7) Slot Host PciConfig
Displays a physical location of a physical PCI device.
With a virtual NIC, the location is shown as "-".
"err" following the slot display indicates that the physical PCI device is
blocked.
LPAR PciConfig
Displays a location of a logical PCI device.
With a virtual NIC, the location is shown as "-".
(8) Seg.Bus.Dev.Fnc Host PciConfig
Displays PCI configuration addresses of a physical PCI device and
virtual NIC.
LPAR PciConfig
Displays the PCI configuration address of a logical PCI device viewed
on the LPAR. "*" at the end of a PCI configuration address indicates
the difference between the physical PCI information and logical PCI
information.
Description
1192