Hitachi Compute Blade 2000 User Manual page 1511

Hide thumbs Also See for Compute Blade 2000:
Table of Contents

Advertisement

Message content
LPAR manager detected different version of firmware on the
Level
Error
Explanation
Combination failure for the firmware version of the NIC device is
detected.
What to do
Check that versions of NIC firmware mounted on the server blade
are all the same. If this action takes no effect, contact the reseller
from which you purchased this equipment or consult maintenance
personnel.
Message content
LPAR manager detected Driver request MCK for Shared FC.
Level
Information
Explanation
LPAR manager received the driver request for recovering a failure in
the shared FC from the guest OS.
What to do
None.
Message content
LPAR manager detected Driver request Port-Isolation for
Level
Information
Explanation
LPAR manager received the driver request for isolating ports in the
shared FC from the guest OS. This log can be collected when the
FC fault threshold management is enabled in the guest OS.
What to do
None.
Message content
LPAR manager detected Driver Ver Error at Shared FC
Level
Warning
Explanation
The FC driver not supporting shared FC was detected.
What to do
Upgrade the driver to the version supporting shared FC.
Message content
LPAR manager detected Driver Ver Error at Shared FC.
Level
Warning
Explanation
The FC driver not supporting shared FC was detected.
What to do
Upgrade the driver to the version supporting shared FC.
Message content
LPAR manager detected error of network communication
Level
Error
Explanation
A fault in the management path was detected. Internal LAN segment
overlaps with the management LAN segment.
What to do
Review the LP IP address setting.
NIC device.
Shared FC.
at expansion card.
at management path.
1460

Advertisement

Table of Contents
loading

Table of Contents