Hitachi Compute Blade 2000 User Manual page 1546

Web console; (3) remote power control provided by a remote console
application.
(5) Forced power-off from ServerConductor/Blade Server Manager
(6) Executing the Smart Configure function
For details about the Smart Configure functionality, see
N+M cold standby.
In cases (4) to (6) above, you can restore the WOL setting to the enabled
status by shutting down the OS. Shut down the OS by powering off the
blades using the front panel button, or by entering the Management
Module's PC command.
In Windows Server 2003 and Windows Server 2008,

OS setup is required to enable WOL. For the required
settings, see "Using Wake-On-LAN (WOL) in LAN
Devices" described in the Compute Blade 2000
Software Guide, and LAN Advanced Function Manual
as appendixes included in Compute Blade 2000
Software Guide.
In Red Hat Enterprise Linux 5.x, WOL is enabled by

default.
1495
Smart Configure in