Hitachi Compute Blade 2000 User Manual page 991

If you type DM in the BSM command menu and press Enter, you are asked to select a
SC/BSM connection setting. At the prompt, enter an SC/BSM connection setting
number, and the current setting of the specified number is displayed.
(M,D,DB,DM,T,[Q]) : DM
Select manager (0-3,[Q=Quit]) : 1
-- Manager detail setting --
No. : 1
Name : BSM_1
IP address : 192.168.
Alert port : 20079
Alert level : Alert
Retry interval (sec) : 5
Retry duration (min) : 10
-- Manager setting menu --
S. Edit setting.
Q. Quit.
(S,[Q]) :
Select a menu item from the following list to execute it.
Menu
S. Edit setting.
Q. Quit
If you type S in the BSM command menu and press Enter, the current setting is
displayed in the numerical order as shown in the table below. To proceed to the next
setting, press Enter, or enter a setting value and press Enter.
Menu
1
2
3
4
5
6
(Enter)
(Enter)
0.253
Edits details of SC/BSM connection setting.
Returns to the previous menu.
SC/BSM name
SC/BSM IP address
SC/BSM alert report number
Alert level to notify SC/BSM
Intervals between connection retries: 5 to 50 seconds
Interval duration: 4 to 20 minutes
940
Description
Description