Hitachi Compute Blade 2000 User Manual page 1358

(3) Example of VLAN Function
The following is an example of using VLAN functions.
Virtual Network
Segment
LPAR manager
LPAR1
VLAN ID=10, 20
Tagged
ID=10,20
LPAR2
No VLAN setting
Untagged
ID=10
LPAR3
No VLAN setting
Undef
<<Setting Example>>
- When setting TagVLAN on OS:
Set the Tagged mode and VLAN ID to the corresponding port on the
Virtual NIC (VNIC) Assignment screen of LPAR manager.
- When sending/receiving Tagged packets to/from the external switch
without setting TagVLAN on OS:
Set the Untagged mode and VLAN ID to the corresponding port on the
Virtual NIC (VNIC) Assignment screen of LPAR manager.
- When sending/receiving Untagged packets to/from the external switch
without setting TagVLAN on OS:
Set the Undef mode (default) to the corresponding port on the Virtual
NIC (VNIC) Assignment screen of LPAR manager.
Setting of handling Tagged
(ID=10, 20) and untagged
packets
Internal
or
external
LAN－SW
: Virtual NIC
: Physical NIC
1307
VLAN ID=10
VLAN ID=20
No VLAN