Hitachi Compute Blade 2000 User Manual page 1516

Hide thumbs Also See for Compute Blade 2000:
Table of Contents

Advertisement

Message content
LPAR manager detected PCI bus error for Shared FC.
Level
Warning
Explanation
A PCI bus fault in shared FC was detected.
What to do
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content
LPAR manager detected PCI Configuration unmatch and
Level
Information
Explanation
Changed PCI device setting information due to the unmatched
hardware configuration. So, the PCI device mode was changed to
the shared mode.
What to do
Check the LPAR manager configuration information and hardware
configuration.
Message content
LPAR manager detected PCI Configuration unmatch.
Level
Information
Explanation
LPAR manager configuration information and PCI device
configuration do not match.
What to do
Check the LPAR manager configuration information and hardware
configuration.
Message content
LPAR manager detected PCI dev assign error.
Level
Warning
Explanation
LPAR manager detected invalid PCI device allocation information.
What to do
Re-allocate the PCI device on the PCI Device Assign screen. If this
LP system log is re-obtained, contact the reseller from which you
purchased this equipment or consult maintenance personnel.
Message content
LPAR manager detected recovery Port-Isolation for Shared FC.
Level
Information
Explanation
Releasing the shared FC port isolation was completed properly.
What to do
None.
Message content
LPAR manager detected Shared FC Link is Available at
Level
Information
Explanation
Shared FC Link is available.
What to do
None.
Message content
LPAR manager detected Shared FC Link is Available.
Level
Information
Explanation
Shared FC Link is available.
What to do
None.
recovered.
expansion card.
1465

Advertisement

Table of Contents
loading

Table of Contents