Hitachi Compute Blade 2000 User Manual page 1037

UBR command

This command backs up, and restores configuration information. Type UBR at the
prompt and press Enter.
5713RF0 NNNNN(0)IOEU>
<< UBR - Backup and restore setting. >>
-- Backup and restore setting menu --
B. Backup.
R. Restore.
Q. Quit.
(B,R,[Q]) :
Select a menu item from the following list to execute it.
Menu
B. Backup
R. Restore.
Q. Quit
If you type B at the UBR command menu and press the Enter, you are prompted to
enter a character string used for the file name. Enter a file name, and a message
appears to save the configuration information. To back up the configuration, type Y at
the confirmation prompt and press Enter. To cancel the operation, type N at the
confirmation prompt and press the Enter, or press Enter.
(B,R,[Q]) : B (Enter)
Input backup file name ([Q=Quit]) : conf
Confirm? (Y,[N]) : Y
- Creating backup file was completed.
- Backup file name is io-conf.backup.
Hit enter key. (Enter)
When the file finishes storing the configuration information, the file name is displayed
and the prompt is ready. Press Enter, and the screen returns to the I/O module
configuration menu. That file is stored in the user directory in the I/O module. You can
take out the file via FTP or SFTP. The account name and password for connection via
FTP or SFTP are the same as when you log in the system console.
UBR(Enter)
Backs up I/O module configuration information.
Restores I/O module configuration information.
Quits the UBR command.
(Enter)
(Enter)
986
Description