Hitachi Compute Blade 2000 User Manual page 1148

14 When the prompt is displayed, enter the set command and set each item.
Set the following items:
Boot Function: Enabled

Select Boot Device: Enabled

Boot Device List: Set WWPN and LUN number, which is usually "0"

because LU0 is commonly LU for booting, for ports that the target
eternal disk array uses.
Set other necessary items for your system environment.
Set other necessary items for your system environment.
hfccfg.XXXXXXXXXXXXXXXX>set
Base Settings:
** Boot Function = Disabled
change? (y/[n]) -->y
0 - Disabled -[default]
1 - Enabled
c - cancel
please select -->1
** Connection Type = Auto Detection
please Enter -->
** Data Rate = 4Gbps
please Enter -->
** Spinup Delay = Disabled
change? (y/[n]) -->
** Login Delay Time = 3sec
change? (y/[n]) -->
** Persistent Bindings = Enabled
change? (y/[n]) -->
** Force Default Parameter for adapter driver = Disabled
change? (y/[n]) -->
** Select Boot Device = Disabled
change? (y/[n]) -->y
0 - Disabled -[default]
1 - Enabled
c - cancel
please select -->1
** << Boot Device List >> (LUN:decimal)
1 - WWPN:0000000000000000 LUN:0000
2 - WWPN:0000000000000000 LUN:0000
3 - WWPN:0000000000000000 LUN:0000
4 - WWPN:0000000000000000 LUN:0000
5 - WWPN:0000000000000000 LUN:0000
6 - WWPN:0000000000000000 LUN:0000
7 - WWPN:0000000000000000 LUN:0000
8 - WWPN:0000000000000000 LUN:0000
change? (y/[n]) -->y
please select a number(1-8,c(cancel)) -->1
** List#1: WWPN:0000000000000000 LUN:0000
1 - Scan Target
2 - Manual setup
3 - Clear this list
c - cancel
please select -->1
===> Target port serching... please wait
===> Target port serch End.
<< Target Device List >>
1 - D-ID:090C00 WWPN:XXXXXXXXXXXXXXXX HITACHI
c - cancel(return to <<Boot Device List>>)
select a Target for Boot Device. (1-xx, c): 1
*** #1: D-ID:090C00 WWPN:XXXXXXXXXXXXXXXX is selected ***
1 - Scan Lun
c - cancel(return to <<Target Device List>>)
please select -->1
<< LUN List (decimal)>>
1 - LUN : 0000
c - cancel(return to <<Target Device List>>)
select a LUN for Boot Device. (1-xx, c): 1
*** List#1 new WWPN and LUN ***
WWPN : XXXXXXXXXXXXXXXX
LUN : 0000
Update List#1 ? (y/[n]) -->y
DF600F
1097