Hitachi Compute Blade 2000 User Manual page 997

-- SNMP agent setting --
Agent : Enable
Contact name : user01
Location : A3F
Port number : 161
Trap level : All
SNMP version : v1/v2c/v3
Engine ID string : xxxxxxxxxxxxxx
Engine ID : yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
The screen for engine ID strings is displayed only when version v1/v2/v3 is selected.
Be sure to configure a string for engine ID. If no string is configured for engine ID,
"([Unchange]) is not displayed.
If you type M in the SNM command menu and press the [Enter] key, you can set the
SNMP manager connection. You are asked to select a SNMP manager. When you
type a SNMP manager number, the current setting is displayed in the following
numerical order. To proceed to the next setting, press Enter, or enter a setting value
and press Enter.
With SNMP version v1/v2c:
Menu
1
2
3
When you type a community manager of the SNMP manager, the changed setting
value is displayed. A confirmation message appears. Type Y and press Enter, and the
SNMP manager connection setting is applied. To cancel the setting, type N and press
Enter, or just press Enter.
(A,M,DA,DM,T,C,[Q]) : M
Select manager (0-3,[Q=Quit]) : 0
SNMP version : v1/v2c
(0=v1/v2c,1=v3,[Unchange]) : 0
Hostname : 0.0.0.0
([Unchange]) : 192.168.100.200
Port number : 162
(1-65535,[Unchange]) :
Community name : Community
([Unchange]) : com01 (Enter)
-- SNMP manager setting --
<Manager0>
SNMP version
Hostname
Port number
Community name
Address for SNMP manager
Port number for SNMP manager
Community Name for SNMP manager
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
: v1/v2c
: 192.168.100.200
: 162
: com01
946
Description