Hitachi Compute Blade 2000 User Manual page 1492

LPAR manager loader detected invalid Intel(R) VT-d setting in this
system.
Message content
Explanation LPAR manager cannot boot due to the Disabled Intel(R) VT-d setting.
What to do Set Enabled in Intel(R) VT-d using the EFI setup menu: [Chipset] >
[North Bridge] > [Tylersburg IOH Configuration] >[Intel(R) VT for
Directed I/O Configuration] > [Intel(R) VT-d].
LPAR manager loader detected invalid Virtualization Technology
Message content
Please set Virtualization Technology setting to enable.
Explanation LPAR manager cannot boot due to the Disabled Virtualization
Technology setting.
What to do Set Enable in Intel Virtualization Technology using the EFI setup
menu: [Advanced] > [CPU Configuration].
LPAR manager Loader detected x2APIC Mode setting to enable.
Message content x2APIC Mode is unsupported in LPAR manager system.
Explanation LPAR manager cannot boot because APIC Mode is not set to xAPIC.
What to do Set APIC Mode to xAPIC using the server blade Web console.
LPAR manager-Loader detected Emulex Multi Channel mode
Message content (Bus:0xXX, Dev:0xXX, Fnc:0xXX), which is not supported. Please
Explanation LPAR manager cannot boot because the Emulex NIC multi-channel
mode is Enabled.
What to do Disable the NIC multi-channel mode using Emulex PXESelect Utility.
See the Hitachi Compute Blade Emulex Adapter User's Guide for
Hardware for details.
This LPAR manager F/W is not supported for this
Message content Please install another LPAR manager F/W supported for this
Explanation This LPAR manager firmware is not supported by this server blade.
What to do Install LPAR manager firmware supported by this server blade.
If any message other than described above, contact the reseller from which you
purchased the product or consult maintenance personnel.
Please set Intel(R) VT-d setting to enable.
setting in this system.
MSR INFO [0xXXXXXXXXXXXXXXXX]
Please change APIC Mode to xAPIC Mode.
disable Emulex Multi Channel mode.
blade(BladeSymphony XXXXXX).
blade.
XXXX: server blade model name
1441