Lpar Manager System Logs Screen Messages - Hitachi Compute Blade 2000 User Manual

LPAR manager system logs screen
messages
The following lists the LP System Logs screen messages displayed on the LP System Logs
screen:
Message content
Level Error
Explanation Aborted the regular time synchronization with NTP due to abnormal
time difference detected.
What to do Disable the NTP on the Date and Time screen to check the NTP
server state. If with no problem, enable it again. Check the logical
RTC time of the LPAR on the LPAR manager screen as well to set
the logical RTC time of the LPAR using the OS command or Adjust
LPAR Time. Message "LPAR manager damage occurred." Is also
collected with this message.
Message content
Level Information
Explanation Replaced the core with an alternative one due to a sign of failure
detected.
What to do Save the LPAR manager system configuration because the
configuration is updated.
Message content
Level Error
Explanation DMAR fault occurred.
What to do Contact your reseller or maintenance personnel.
Message content
Level Error
Explanation Dmar fault occurred.
What to do Contact your reseller or maintenance personnel.
Message content
Level Information
Explanation LPAR manager configuration information and server blade
configuration do not match.
What to do Check the LPAR manager configuration information and server
blade configuration.
An abnormal time difference was detected.
CPU core swap is completed. (Auto).
Dmar Fault occurred.
Dmar Fault occurred.
Found the machine type mismatch LPAR manager initialized
the configuration files.
1453