Hitachi Compute Blade 2000 User Manual page 1051

Item
LPAR manager standard mode
LPAR manager expansion mode
Processor
Minimum division unit
Max number of logical processors per LPAR
Dedicated processor
Allocation of physical processor numbers
Shared processor
Allocation of physical processor numbers
Service ratio
Idle detection
Capping
Processor group
Max number of definable groups per LPAR manager
LPAR manager standard mode
LPAR manager expansion mode
Hyper threading
Dynamic change in scheduling mode
Memory
Minimum division unit
Maximum amount available for assignment per LPAR
LPAR manager standard mode
LPAR manager expansion mode
Memory used by LPAR manager
LPAR manager standard mode
LPAR manager expansion mode
Non-NUMA
NUMA
NIC Multi-channel
iSCSI
FCoE
*12
SR-IOV
Dedicated NIC
Minimum division unit
Maximum number of dedicated NIC ports to be assigned
per LPAR
Supported (Not supported)
the following LPAR
manager firmware versions
16: 57-1X or later
16: 58-7X or later
30: 58-8X or later
Core: 57-1X or later
Thread: 57-3X or later
16: 57-1X or later
32: 59-5X or later
*8
16: 58-3X or later
16: 58-7X or later
30: 58-8X or later
256 MB: 57-1X or later
*3
142.75 GB: 57-1X or later
190.75 GB: 58-1X or later
510.75 GB: 59-0X or later
766.75 GB: 59-21 or later
190.5 GB: 58-7X or later
510.5 GB: 59-0X or later
766.5 GB: 59-21 or later
Controller: 57-1X or later
Identical to the number of physical
1000
by
57-1X or later
58-3X or later
57-1X or later
57-1X or later
57-1X or later
58-3X or later
57-3X or later
58-4X or later
1.25 GB
1.5 GB
57-1X or later
59-2X or later
Not supported
Not supported
Not supported
59-7X or later
NIC ports:
57-1X or later