Hitachi Compute Blade 2000 User Manual page 1044

ID Level
Meaning: E-mail notification fails.
Action: Check if communication between the mail server and I/O slot expansion unit is
available, and e-mail notification settings. If any problems are in the settings, correct them.
18AA Info Collecting error data for an e-mail report message failed.
Meaning: Data collection for e-mail notification fails. Data attached to e-mail may be partly
lost.
Action: Nothing is required. If this message frequently appears, however, consult your reseller
or maintenance personnel.
18AB Info Sending out an e-mail report message succeeded.
Meaning: The retried e-mail notification is successfully sent.
Action: Nothing required.
18AE Info The time limit for transmitting and receiving an alert has been
exceeded.
Meaning: Sending and receiving alert messages to SC/BSM failed, retried, failed again, and
the retry time exceeded. Alert notifications tried have not reached BSM.
Action: In the device notification log window of SC/BSM console services, calculate time by
subtracting the retry duration time from the time when the message ID: 18AE was generated.
Check alerts notified for between the answer of the subtraction and the time when the
message ID: 18E0 was generated, and work with the problem according to those alerts.
You can locate the duration time of alert sending retry in Retry duration, which is displayed by
executing the BSM command
18B0 Info The time setting was updated.
Meaning: I/O module time setting is updated.
Action: Nothing required.
18B1 WARNING Connecting to the NTP server was failed.
Meaning: Connection to the NTP server fails.
Action: Check if communication between the I/O slot expansion unit and NTP server is
available. Also check the NTP server setting of the I/O slot expansion unit.
18B2 Info Connecting to the NTP server was restored.
Meaning: Connection between the I/O slot expansion unit and NTP server is restored. Action:
Check if the I/O slot expansion unit time is correct.
18C0 Info On module <%s1>, An event was logged.
Meaning: An event is registered in the module shown in %s.
Action: Nothing required.
18D4 Info On module <%s1>, F/W update was started.
Meaning: Firmware of the module shown in %s starts updating. This message may be
displayed several times for maintenance work.
Action: Just wait until the firmware has completely updated without connecting to or operating
the I/o slot expansion unit.
18D5 Info On module <%s1>, F/W update was completed.
Meaning: Firmware of the module shown in %s has completely updated.
This message may be displayed several times for maintenance work.
Action: Nothing required.
18DC Info On module <%s1>, maintenance mode was set.
Meaning: Maintenance work begins in the module shown in %s. This message may be
displayed several times for maintenance work.
Action: The module is under maintenance work. Do not connect to or operate that module.
18DD Info On module <%s1>, maintenance mode was cancelled.
Message
Description
from the I/O expansion unit console.
993