Hitachi Compute Blade 2000 User Manual page 1295

Select a time source on the subscreen and press Enter.

|| 6 +------------------------------------------+
|| 7 | Select Source time to adjust LPAR time. |
|| 8 |
|| 9 |
|| 10 |
|+----------------|
| +------------------------------------------+Down]:Page Down |
|+- System Date an| Adjust LPAR time with Specified Zone.
|| Date and Time +------------------------------------------+djust LPAR Time ||
Select Specified Zone in the figure above to show a subscreen. Specify a

time zone on the following subscreen and press Enter.
|| 7
|| 8
|| 9
|| 10
|+----------------------------|
|
|+- System Date and Time -----+-----------------+------------------------------+
Select the target LPAR and press Enter.

|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
|+-------------------------| 2 LPAR2
|
|+- System Date and Time --| 4 LPAR4
|| Date and Time yyyy/mm+-----------------------++ 9:00
On the Menu screen, press F9: Save Configuration to save the configuration.

|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
(2) How to adjust the LPAR RTC time
Adjusting the LPAR RTC can be executed only for activated LPARs.
(a) Using NTP (recommended)
Set NTP referring to
have set NTP, perform the following steps.
On the Date and Time screen, synchronize the LPAR time using Adjust LPAR

Time.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync SVP
|+----------------------------------------------------------------------------+|
HVM System Time
Specified Zone
UTC
+-----------------+
| +10 |
| |
| -1 + 9:00 +1 |
|-----------------------------+|
| -10 |ge Up / [PageDown]:Page Down |
+-----------------------+
| Time Adjust LPAR |
| (with Specified Zone) |
| |
| 0 All LPAR |
| 1 LPAR1 |
|--------------------------+|
| 3 LPAR3 |Up / [PageDown]:Page Down |
|--------------------------+|
(9) How to operate LPAR manager using
1244
||
||
| ||
| ||
| ||
|----------------+|
|----------------+|
||
||
||
||
||
||
||
||
||
||
Adjust LPAR Time ||
| |
|
NTP. If you
Adjust LPAR Time ||
||
||