Hitachi Compute Blade 2000 User Manual page 883

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

Shutdown status

Port connected mode

Flow control reception

Displays port numbers.

Edit supplementary information using up to 64

alphanumeric characters.

Select shutdown status: Enable or Disable

Select a port speed.

Select a port connected mode.

- When a parameter including "auto" or the

"auto" itself is assigned to the port speed or

port connected mode, auto-negotiation is

- When not using auto-negotiation, set the port

speed to 10 or 100 and also the duplex to full

- When you have changed the port speed to 10

or 100 and the duplex to half for the server

connection port, the mode becomes "auto"

without applying the changed values. The

values, however, are changed on the Web

- When not using auto-negotiation with the

server connection port, make sure to select

1000 for the port speed and full for the port

connection mode.

- When selecting auto 1000 for the port speed

of the server connection port, do not change

the port connection mode. The port might be

linked down and then linked up.

Select a value for flow control reception.

With the fixed mode specified, pose packets

are received. With auto-negotiation specified,

pose packet receptions are determined by

communicaiton between devices.

Chapters

Table of Contents