Hitachi Compute Blade 2000 User Manual page 1216

# Title Official Name
(17) PC Processor
Capping
(18) VC Virtual Console
(19) PB Pre-boot
Firmware
(20) Page Up / Page Up /
Page Down Page Down
key
(21) Assign Total Total resources
allocated to
LPAR
(22) Act Total Total resources
used by LPARs
(23) Remain Configurable
memory
Description
Enables/disables the Processor Capping function.
Y: Enables the Processor Capping when using
shared logical processors
N: Disables the Processor Capping when using
shared logical processors
*: For logical processors in dedicated mode, the
processor capping function is invalid.
This item is available only for shared mode LPARs.
It is not for dedicated mode LPARs and cannot be
set for them.
Enables/disables the virtual COM console function,
or specifies a VC number.
Y: Enables the virtual COM console.
N: Disables the virtual COM console.
High-performance server blades with LPAR
manager firmware 78-4X or later versions
LPAR manager firmware 58-4X/78-4X or later
versions
1-16: Specify a VC number of the virtual COM
console with the F1 key.
Specify the Pre-boot firmware.
BIOS:Start the logical BIOS by activating LPAR.
Page Up‫ ׃‬Scrolls a page of the screen upwards.
Page Down‫ ׃‬Scrolls a page of the screen
downwards.
Displays the total resources on all the LPARs.
Pro: Displays the total number of logical processors.
Shr: Displays the total number of logical processors
in the sharing mode.
Ded: Displays the total number of logical processors
in the occupation mode.
Mem: Displays the total memory amount in
megabytes.
VNI: Displays the total number of virtual NICs.
Displays the total resources on all the LPARs which
are activated.
Pro: Displays the total number of logical processors.
Shr: Displays the total number of logical processors
in the sharing mode.
Ded: Displays the total number of logical processors
in the occupation mode.
Mem: Displays the total memory amount in
megabytes.
VNI: Displays the total number of virtual NICs.
Displays the remains of configurable memory to be
used by LPARs in MB: Total memory for LPAR
minus total memory currently used by LPAR.
Memory, isolated due to failure detected, will not
affect this item to display.
1165
Initial Value
(When LPAR
is added)
*
N
BIOS
-
-
-
-