Migration between basic environment
and LPAR manager environment
Migration from basic environment to LPAR manager environment
The following table describes the setting and checking items when migrating from the
basic environment to an LPAR manager environment.
Item
OS
Server blade
SAN security
*1 See
EFI setting
for the details.
*2 See
LP mode setting
Migration from LPAR manager environment to basic environment
The following table describes setting and checking items when migrating from LPAR
manager environment to the Basic environment.
Item
OS
Server blade
SAN security
*1 See
EFI setting
for details.
*2 See
LP mode setting
Setting and Checking
Before migration
Delete the IP Address. (only for
Set an IP Address. (only for Windows)
Windows)
Set the SVGA resolution to
-
800x600; 256 colors.
-
Install the NIC driver.
Set EFI. *1
-
Set the LP mode. *2
-
-
Change the setting of
for the details.
Setting and Checking
Before migration
Delete the IP Address. (only for
Set an IP Address. (only for Windows)
Windows)
Install the NIC driver.
Set EFI. *1
-
Set the Basic mode. *2
-
-
Change the setting of
for details.
1364
After migration
WWPN/WWNN
After migration
WWPN/WWNN