Hitachi Compute Blade 2000 User Manual page 1529

Message content
Level Error
Explanation Physical SVGA initialization failed.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content
Level Warning
Explanation Initializing the access to the management module failed.
What to do Contact your reseller or maintenance personnel.
Message content
Level Error
Explanation System service request failed.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content There are not enough H/W resources for SR-IOV feature.
Level Error
Explanation Detected hardware resource shortage for SR-IOV functions.
What to do Check if all firmware combination supports SR-IOV. Refer to "Hitachi
Compute Blade Emulex Adapter User's Guide for Hardware" for the
correct combination.
Message content
Level Warning
Explanation A temperature rise warning event occurred.
What to do Remove the dust from the air vent of the system device to improve
ventilation. If this LPAR manager event log is collected although
ventilation is improved, contact the reseller from which you
purchased this equipment or consult maintenance personnel.
Message content
Level Information
Explanation A temperature rise warning was released.
What to do None.
Message content Uncorrectable memory error occurred (address).
Level Error
Explanation A memory error, which LPAR manager cannot correct, occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
SVGA Initialization failed.
SVP access initialization failed.
System Service request command failed.
Thermal error occurred.
Thermal error was restored.
1478