Hitachi Compute Blade 2000 User Manual page 986

 MLC command
You can display the network setting for maintenance. Type MLC at the prompt and
press Enter.
5713RF0 NNNNN(0)IOEU> MLC
<< MLC - Maintenance LAN setting. >>
-- I/O module --
# IP address Subnetmask
- --------------- ---------------
0 192.168.254. 1 255.255.255.
1 192.168.254. 2 255.255.255.
-- static route --
Network address :
Subnetmask :
Router IP address :
-- Maintenance LAN setting menu --
Q. Quit.
([Q]) :
Select a menu item from the following list to execute it.
Menu
Q. Quit
Items per I/O module on the screen are described in the table below.
Menu
IP address
Subnetmask
Items of the static route are described in the table below.
Menu
Network address
Subnetmask
Router IP address
(Enter)
0
0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Quits the MLC command.
IP address of the interface for the maintenance network of
the I/O module
Subnetmask of the interface for the maintenance network
of the I/O module
Network address of a network targeted for static routing
Subnetmask of a network targeted for static routing
IP address of a router transferring to targeted network for
static routing
935
Description
Description
Description