Hitachi Compute Blade 2000 User Manual page 1262

Inter-LPAR packets
Inter-LPAR
Inside LPAR
packet filtering
manager
Disable (ALL) Transferred
+------------------------------------------------------------------------------+
|+- Virtual NIC Assignment ---------------------------------------------------+|
||
||
|| Virtual NIC Number
|| # Name Sta #VNIC 0
|| 1 LPAR1 Dea 2 1a 1b
|| 2 LPAR2 Dea 0 *
|| 3 LPAR3 Dea 0 *
|| 4 LPAR4 Dea 0 *
|| 5 +------------------------------+*
|| 6 | Inter-LPAR Packet Filtering |
|| 7 |
|| 8 |
|| 9 |
|| 10 |
|| +------------------------------+/ [PageDown]:Page Down ||
|+----------------------------------------------------------------------------+|
|+-VNIC Information-----------------------------------------------------------+|
|| No: 0 MAC Address: 00.00.87.62.f7.00 Shared NIC#: 1 Tag: Undef Prm: T ||
|| Inter-LPAR Packet Filtering: Disable
|| VLANID:
++----------------------------------------------------------------------------++
| F2:Disp F5:Set Prom. Mode F6:Change MAC Addr F7:Select VLAN
| F8:Packet Filter
+------------------------------------------------------------------------------+
Note:If you press F8: Packet Filter when the shared NIC, specified with the cursor, is
not defined in the network segment identifier, the subscreen will not be
displayed.
Packets to
Outside
outside LPAR
LPAR
manager
manager
LPAR manager firmware:
57-31 or later versions
Enables inter-LPAR
communication in the
Transferred Transferred
same segment.
Used for inter-LPAR
communication using
network redundancy
configuration.
1 2 3 4 5 6 7
* * * * * *
* * * * * * *
* * * * * * *
* * * * * * *
|
Disable |
Enable |
Disable (ALL) |
1211
Use
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
|
Esc:Menu |