Hitachi Compute Blade 2000 User Manual page 659

New settings are displayed after setting is complete. A confirmation message is
displayed, and the prompt is ready. To save the settings, type Y and press Enter. To
cancel the settings, type N and press Enter or just press Enter after the confirmation
message.
(E,[Q]) : E
Syslog transfer
(0=Disable,1=Enable,[Unchange]) : 1
Hostname of syslog server
([Unchange]) : 192.168.0.120
Notification of audit event : Enable
(0=Disable,1=Enable,[Unchange]) : 0
-- Syslog transfer setting --
Syslog transfer
Hostname of syslog server
Notification of audit event : Disable
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
: Enable
: 192.168.0.100
: Enable
: 192.168.0.120
608