Hitachi Compute Blade 2000 User Manual page 1265

The following table describes each item on this screen.
Official
# Title
Name
(1) # LPAR
Number
(2) Name LPAR Name Displays the LPAR name.
(3) Sta Status
(4) Slot# Slot Number Displays the number of the PCI slot into which the FC is
(5) Port# Port#:
Number
(6) PortStatus PortStatus
(7) Shared FC Shared FC
Assignment Assignment
(8) PageUp / Page Up /
PageDown Page Down
keys
(9) Selected Virtual FC
Virtual FC Port Port WWN
WWN Information
Information
(10) Function Key Function Key Displays the function keys that can be used in this
(11) Error event Error event
detected detection
Description
Displays LPAR numbers.
Displays the LPAR status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due to an
unrecoverable failure. Reboot LPAR manager when this
happens.
inserted.
Displays the shared FC port number.
Displays the shared FC port status:
A: Available. Normal status
D: LinkDown. Unavailable because the cable is not
connected.
C: ConfigCheck. Unavailable due to configuration
problem.
E: Error Check. Unavailable due to unrecoverable
failure.
-: (Unknown) Unavailable due to the unknown status.
See "(3) PortStatus" for further details.
Sets the shared FC port to each LPAR.
To assign the shared FC port, select the shared FC port
by eh cursor to display a subscreen and set vfcID.
Page Up: scrolls a page upwards.
Page Down: scrolls a page downwards.
Displays the information on the shared FC port selected
by the cursor.
LPAR#: Displays the LPAR# to which the shared FC is
assigned.
WWPN: Displays WWPN of the shared FC.
WWNN: Displays WWNN of the shared FC.
Bus#/Dev#/Func#: Displays Bus#/Dev#/Fuc# of the
PCI device with the shared FC implemented/
vfdOD#: Displays vfcWWN-ID set in the shared FC.
screen.
F11: Scrolls the page leftward to show the screen.
F12: Scrolls the page rightward to show the screen.
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in the
LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this
screen or open the system logs screen.
1214
Initial Value
(When LPAR is
added)
-
NO_NAME
Dea
-
-
-
*
-
-
-
-