Lpar Manager Initial Settings - Hitachi Compute Blade 2000 User Manual

3 In about five or six minutes after power-on, a message "Initializing LP" will be
displayed.
+------------------------------------------------------------------------------+
|+- System Configuration -----------+-----------------------------------------+|
||
|| LP ID
||
|| LP IP Address
|| Subnet Mask
|| Default Gateway 0.0.0.0
||
|| BSM1 IP Address 192.168.0.168
|| BSM2 IP Address 0.0.0.0
|| BSM3 IP Address 0.0.0.0
|| BSM4 IP Address 0.0.0.0
|| BSM1 Alert Port 20079
|| BSM2 Alert Port 20079
|| BSM3 Alert Port 20079
|| BSM4 Alert Port 20079
||
|| Management Path
|| VNIC System No:
|+----------------------------------+-----------------------------------------+|
|
+------------------------------------------------------------------------------+
4
In a couple of minutes, LPAR manager initialization is completed and "Initializing
LP" will disappear.
Required time for LPAR manager boot is different depending on the SMP configuration or
PCI devices installed.

LPAR manager initial settings

1 The System Configuration screen is displayed at the first LPAR manager boot after
applying LPAR manager.
When having set and saved the following items on this screen, the LPAR manager
Menu appears to operate the LPAR manager screen.
Logical partitioning manager (LP) Internet Protocol (IP) Address

Subnet Mask

Virtual NIC (VNIC) System No

|
LP_0000 | Alert Language
| Virtual Console Port
0.0.0.0 |
255.255.255.255 |
|
|
|
+-------------------+
|
| Initializing LP
|
+-------------------+
|
|
|
Default |
0 |
1049
||
Japanese ||
20801 ||
||
||
||
||
||
||
| ||
| ||
| ||
||
||
||
||
||
||
|