Hitachi Compute Blade 2000 User Manual page 943

 PES command
Status of the peripheral components interconnect (PCI) express expander such as
power operation, setting, and cables is displayed. Type PES at the prompt, and press
5713RF0 NNNNN(0)IOEU>
<< PES - PCI Express expander. >>
-- PCI Express expander status --
# Power Condition
- ----- ---------
0 On Normal
1 --- -------
-- PCI Express expander setting --
# Current Config
- ------- ------
0 1:8 1:8
1 ----- 1:8
-- PCI Express expander menu --
D. Show detail cable information.
Q. Quit.
(D,[Q]) :
Enter.
Select a menu item from the following list to execute it.
Menu
D. Show detail cable
information.
Q. Quit
Status of PCI Express expander is described in the table below.
Item Description of item
# I/O module slot
number with a PCI
express expander
installed
Power Power status
Condition Failure status
PES(Enter)
Displays cable status.
Quits the PES command.
Value
0.1 -
PCI express expander: Not installed
-------
in the I/O module.
On Power is On.
Off Power is Off.
------- PCI express expander: Not installed
in the I/O module.
Normal Normal condition
Fail Failed status
892
Description
Description of value