Hitachi Compute Blade 2000 User Manual page 1241

The following table describes each item on this screen.
Official
# Title
Name
(1) # PCI Device
Number
(2) Vendor Vendor Name Displays the name of the vendor of the PCI device. (displays up to 15
(3) Device Name Device Name Displays the name of the PCI device. (displays up to 31 characters)
(4) Slot# Slot Number
(5) LPAR# LPAR
Number
(6) SNIC# Shared NIC
Number
(7) PageUp / Page Up /
PageDown Page Down
Keys
(8) Function Key Function Key LPAR manager firmware version 58-7X/78-7X or later
(9) Error event Error event
detected detection
Description
Displays the number that LPAR manager gives each PCI device for
identification purposes.
characters)
Displays the slot number to which the PCI device is inserted.
Device type
Onboard USB (Front USB, Remote console)
Onboard SAS
Onboard NIC (Kawela)
PCI card slot 0-15
Mezzanine card slot0
Mezzanine card slot1
I/O board slot 0-15
x: Server blade number; y: I/O slot expansion unit number
Displays the LPAR number to which the PCI device is assigned.
Number: When the PCI device has been assigned to a single LPAR,
the LPAR number that the PCI Device has been assigned to.
M: The PCI device has been assigned to multiple LPARs.
S: The PCI device is being shared.
- : The PCI device is not assigned.
Displays the shared NIC number of a PCI device if it is a shared NIC.
Number: Indicates that the PCI device is a shared NIC number
- : Indicates that the PCI device is not a shared NIC.
Page Up: scrolls a page upwards.
Page Down: scrolls a page downwards.
Displays the function key available on this screen.
F2: Use this key to display the PCI device mapping information.
Displays that LP system logs at the error level are detected.
When this is displayed, check the LP system log in the LP System
Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this screen or open the
system logs screen.
1190
Slot #
Ux
Sx
Gx
0-15
Ex0
Ex1
Iy0-Iy15