Hitachi Compute Blade 2000 User Manual page 1227

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

LPAR manager firmware 58-4X/78-4X or later versions

Display the Logical Partition Configuration screen.

Place the cursor on the VC column of the LPAR line whose virtual COM console

function you want to enable, and then press the F1 key to display a subscreen.

Select a VC number to connect by moving the cursor with the [] [] keys, and then

press Enter. As a result, you can connect the LPAR guest screen via telnet. The

TCP port to be used at the connection via telnet can be found in the comment that

appears when pointing to the VC column of LPAR line.

When the virtual COM console function is enabled and connected to the LPAR

guest console via telnet, LPAR guest screen connection by using the F8 key in the

LPAR manager screen is still available. In this case, the LPAR guest screen

displayed on the

LPAR manager screen is preceded.

+-----------------------+-----------------------------+------------------------+

|+- Logical Partition(LP|

LPAR1 Virtual Console

|+----------------------|

|+- Logical Information |

|| Assign Total

|| Act Total

|+----------------------|

| Virtual Console(TCP P+-----------------------------+

+-----------------------| F1:Allocated VC Information |------------------------+

| F2:Mem Alloc Dsp F3:+-----------------------------+ F7:Remove

+-----------------------+-----------------------------+------------------------+

|-----------------------+|

|A AC PC VC PB

|* N * N BIOS

|* N * N BIOS

|* N * N BIOS

|/ [PageDown]:Page Down ||

|-----------------------+|

|Physical Information --+|

|ser Memory : 4608

| Dedicate : 2

|-----------------------+|

Chapters

Table of Contents