Hitachi Compute Blade 2000 User Manual page 1541

Sample Setup with a Server Blade Running Linux 6
This example is for Red Hat Linux.
1 /boot/grub/grub.conf setting
At the end of each kernel line, enter the console parameters to be passed to the
kernel.
console=tty0 console=ttyS0,115200
When entering from the keyboard on OS console, set the following.
2 /etc/securetty setting
Add "ttyS0".
3 Create /etc/init/ttyS0.conf
# --------------------------
# ttyS0 – agetty
# This service maintains a agetty on ttyS0.
stop on runlevel [S016]
start on runlevel [23]
respawn
exec agetty -h -L -w /dev/ttyS0 115200 vt100
# --------------------------
Install Linux to use "Text mode" login.
If you installed Linux to use "Graphic mode" login, switch to
"Text mode" login. For details about how to change the
login mode, see your Linux manual.
1490