Hitachi Compute Blade 2000 User Manual page 1146

8 When the Boot Maintenance Manager screen is displayed again, press Esc to
show the screen at the logical basic input/output system (BIOS) boot.
/------------------------------------------------------------------------------\
| Boot Maintenance Manager
\------------------------------------------------------------------------------/
Boot Options
Set Time Out Value
Reset System
/------------------------------------------------------------------------------\
|
| ^v=Move Highlight <Enter>=Select Entry
\------------------------------------------------------------------------------/
9 Select Continue on the screen displayed at the logical BIOS boot.
Hitachi Compute Blade E55
Intel(R) Xeon(R) CPU
(IA32.UEFI) Ver: 1.20
Continue
Boot Maintenance Manager
^v=Move Highlight <Enter>=Select Entry
See 'EFI Driver' in the HITACHI Gigabit Fibre-channel Board User's Guide
(BIOS/EFI Edition)" for further details about the EFI driver.
Modify system boot
options
Esc=Exit without Save
LP LPAR
E5504 @ 2.00GHz 1.99 GHz
This selection will
direct the system to
continue to booting
process
1095
|
|
|