Hitachi Compute Blade 2000 User Manual page 627

Items of SNMP manager setting are described in the table below:
Item Description of item
SNMP SNMP version
version
IP address IP address of the SNMP
manager
Port number Port number of the SNMP
manager
User Name User name
Access type Access type
Authentication Authentication type
type
Authentication Authentication password
password
Encryption Encryption type
type
Encryption Encryption password
password
Community Community name of the
name SNMP manager
(*)When the Security strength is set to High, SNMP v3 is the only available protocol
Value
Character SNMP version used by the
string in SNMP manager.
ASCII
Value: v1/v2c or v3
IP address Up to 4 IP addresses of the
SNMP manager can be
registered.
Setting for the manager is
disabled by specifying 0.0.0.0.
Integer Integer between 1 and 65535:
However, the value 161 is not
available.
Character Available only when the SNMP
string in version is v3.
ASCII
Character string in ASCII: at
least 1; up to 32 characters
noAuthnoPriv Available only when the SNMP
version is v3.
No authentication and
encryption
AuthnoPriv Available only when the SNMP
version is v3.
With authentication but no
encryption
AuthPriv Available only when the SNMP
version v3.
With authentication and
encryption
MD5 Available only when the SNMP
version is v3.
Type: MD5
Available only when the SNMP
SHA
version is v3.
Type: SHA
Character Available only when the SNMP
string in version is v3.
ASCII
String comprised of 8 to 64
characters in ASCII
PEM Available only when the SNMP
version is v3.
Type: PEM
DER Available only when the SNMP
version is v3.
Type: DER
Character Available only when the SNMP
string in version is v3.
ASCII
String comprised of 8 to 64
characters in ASCII
Character Available only when the SNMP
string in version is v1/v2c.
ASCII
Up to 60 characters in ASCII
576
Description of value