Hitachi Compute Blade 2000 User Manual page 1338

 ServerConductor/Blade Server Manager access failure notification
Display the following subscreen if the connection with ServerConductor/Blade Server
Manager is lost.
+----------------------------------------------------(3) Error Event Detected--+
|+-- Menu [LP_192168020] ----------------------------- 2009/02/18 14:20:19 -+ |
||
|| Logical Partition Configuration
|| Logical Processor Configuration
|| Physical Processor Configuration
|| PCI Device Information
|| PCI Device Assignment
|| VNIC Assignment
|| Shared FC Assignmen+-------------------------------+
|| Allocated FC Inform|SC MANAGER ACCESS FAILURE !
||
|+---------------------|(2)
|
|+-- Tips -------------+-------------------------------+---------------------+ |
|| F3 : Activate
|| F4 : Deactivate
|| F5 : Reactivate
|| F6 : Add Definition
|| F7 : Remove
|+---------------------------------------------------------------------------+ |
| Operation confirmation and demo setting
+------------------------------------------------------------------------------+
| :Move Cursor Enter:Select
+------------------------------------------------------------------------------+
The following table describes each item on this screen.
# Title Official Name
(1) IP Address ServerConductor/Blade
Server Manager IP
Address
(2) CONNECT Connection status
(3) Error Event Error Event Detected
Detected
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
Front Panel
|(1) IP ADDRESS : 192.168.0.168 |
CONNECT : FAIL
|
F9 : Save Configuration
Alt + t : Screen Refresh
Alt + r : LP System Shutdown
LP Ver. : VV-RR(TT-KK)
Displays the IP address of the ServerConductor/Blade
Server Manager to which connection failed.
Displays the status of the connection with the
ServerConductor/Blade Server Manager.
SUCCEED: The ServerConductor/Blade Server
Manager connection established
FAIL: The ServerConductor/Blade Server Manager
connection failed
Detected an LP system log at the error level. When this
is displayed, check the LP system log on the LP system
logs screen referring to
screen messages.
To delete this message, press the Esc key on the LPAR
manager menu screen or open the LP system logs
screen.
1287
| |
| |
| |
| |
| |
| |
| |
| |
|Information | |
| |
|---------------------+ |
| |
| |
| |
| |
| |
| |
|
|
Description
LPAR manager system logs