Hitachi Compute Blade 2000 User Manual page 616

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

 XD command

You can execute diagnostics. Enter XD at the prompt, and press Enter.

5713RF0 NNNNN(0)SVP> XD (Enter)

<< XD - Execute diagnostics. >>

-- Diagnostics menu --

I. ICMP Ping.

Select a menu item in the table below to execute the function.

If you enter [l] in the XD command menu and press Enter, the prompt is ready for the

IP address. When pressing Enter during the prompt for IP address, the screen goes

back to the XD command menu. Enter the IP address at the prompt. A confirmation

message appears to confirm executing diagnostics. At the prompt, enter Y and press

Enter. Diagnostics are executed and the result is displayed. To cancel diagnostics,

enter N and press Enter, or just press Enter.

(I,[Q]) : I (Enter)

Input IP address ([Q=Quit]) : 192.168.0.253 (Enter)

Confirm? (Y,[N]) : Y

PING 192.168.0.253 (192.168.0.253): 56 data bytes

64 bytes from 192.168.0.253: icmp_seq=0 ttl=64 time=3.2 ms

64 bytes from 192.168.0.253: icmp_seq=1 ttl=64 time=0.4 ms

64 bytes from 192.168.0.253: icmp_seq=2 ttl=64 time=0.2 ms

--- 192.168.0.253 ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max = 0.2/1.2/3.2 ms

Hit enter key. (Enter)

Check the network connection using the Internet Control

Message Protocol (ICMP) Ping.

Quits the XD command.

Chapters

Table of Contents