Hitachi Compute Blade 2000 User Manual page 1276

(8) How to set the Alert Language
Display the System Configuration screen. Place the cursor on the Alert Language
and press Enter to display a subscreen. Select a language to use on the subscreen
and press Enter.
(9) How to set the Virtual Console Port
Display the System Configuration screen.
Place the cursor on Virtual Console Port and press Enter to display a subscreen.
Input a virtual console port that you want to change, and then press Enter.
TCP ports from 1024 to 65520 are available for setting..
When changing the virtual console port value, the TCP port is changed. Therefore,
reconnecting the LPAR guest screen is necessary.
If the changed value of the virtual console port is the same as the TCP port used in
another application, you might not be able to access the LPAR guest console.
(10) How to change the LPAR manager Operating Mode
Standard server blades with LPAR manager firmware version 58-71 or later
/High-performance server blades with LPAR manager firmware version 78-71 or
later
When LPAR manager Operating Mode is changed from

standard mode to expansion mode, LPAR manager
starts with memory to which 256 MB is added. The
memory for the guest OS is reduced by 256 MB. This
might cause some LPARs not to activate due to a
memory shortage if the maximum memory has been
used in LPAR manager standard mode
For LPAR manager operating mode, see

manager operating mode, LPAR manager Functions.
Place the cursor on LPAR manager Operating Mode and press Enter.

+------------------------------------------------------------------------------+
|+- System Configuration -----------+-----------------------------------------+|
||
|| LP ID LP_192168020
||
|| LP IP Address 192.168.0.20
|| Subnet Mask 255.255.255.0
|| Default Gateway 0.0.0.0
||
|| BSM1 IP Address 192.168.0.168
|| BSM2 IP Address 0.0.0.0
|| BSM3 IP Address 0.0.0.0
|| BSM4 IP Address 0.0.0.0
|| BSM1 Alert Port 20079
|| BSM2 Alert Port 20079
|| BSM3 Alert Port 20079
|| BSM4 Alert Port 20079
||
|| Management Path Default
|| VNIC System No: 1
|+----------------------------------+-----------------------------------------+|
|
+------------------------------------------------------------------------------+
| F10:Update System Config
LPAR
|
| Alert Language Japanese
| Virtual Console Port 20801
| LP Operating Mode Standard
|
|
|
| LP CLI1 IP Address 0.0.0.0
| LP CLI2 IP Address 0.0.0.0
| LP CLI3 IP Address 0.0.0.0
| LP CLI4 IP Address 0.0.0.0
| LP CLI5 IP Address 0.0.0.0
| LP CLI6 IP Address 0.0.0.0
| LP CLI7 IP Address 0.0.0.0
| LP CLI8 IP Address 0.0.0.0
|
|
|
1225
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
|
Esc:Menu |