Hitachi Compute Blade 2000 User Manual page 653

Type A in the HCSM command menu and press Enter to set HCSM service. Current
values are shown in the following order. Press Enter or type a new value and press
Enter to go to the next item.
Order
1 HCSM
2 Access control
A message asks whether or not to use default account settings for HCSM account and
password; the prompt is ready. To apply the default values to HCSM account and
password, type Y and press Enter. To set a new account and password, type N and
press Enter or just press Enter.
When the account and password are entered, HCSM service settings will be shown.
Confirm is displayed and the prompt is ready. To apply the HCSM service settings,
type Y and press Enter. To cancel the settings, type N and press Enter.
HCSM
(0=Disable,1=Enable,[Unchange]) : 0
Access control
(0=Disable,1=Enable,[Unchange]) : 1
Use default account setting (Y,[N]) : N
Account
([Unchange]) : Hitachi
Password
Retype password
-- HCSM service setting --
HCSM : Enable
Access control : Disable
Port number : 443
Account : Compute
Confirm (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
Type M in the HCSM command menu, and press Enter to display the HCSM server
setting menu.
-- HCSM server setting –
No. IP address Alert port Alert level
--- --------------- ---------- ------------- -------- -------- -------------
1 192.168. 0. 20
2 192.168. 0. 51
-- HCSM server setting menu --
A. Add HCSM server.
M. Modify HCSM server.
D. Delete HCSM server.
Q. Quit.
(A,M,D,[Q]) :
Setting item
: Enable
: Disable
: Compute
:
:
26119 Warning
26119 All
602
Retry Retry
interval Duration Session
2 10 Connected
2 10 Not connected