Hitachi Compute Blade 2000 User Manual page 863

You have to operate this in the administrator mode.
Restoring the configuration (apply to startup-config)
1 Restore using the File Transfer Protocol (ftp) server (Server address:
192.168.0.128/user name: staff).
> enable
<= Press [Enter].
# copy ftp://staff@[192.168.0.128]/Backup.conf startup-config
Configuration file copy to startup-config? (y/n): y
Authentication for 192.168.0.128
User: staff
Password:
Transferring...
Data transfer succeeded.
2 Restore using the MC (Read from the MC).
> cd/usr/home/operator
> cp mc-file backup.conf backup.conf
> enable
<= Press [Enter].
# copy /usr/home/operator/backup.conf startup-config
Configuration file copy to startup-config? (y/n): y
<= Press [Enter].
<= Press [Enter].
812
<= Press [Enter].
<= Press [Enter].
<= Press [Enter].
<= Press [Enter].